Object terminal “Antaeus” AS009H “Solovey”

Object terminal “Antaeus” AS009H “Solovey” is listed as licensed production by Main Directorate of the Extradepartmental Protection of Russia.

Object terminal “Antaeus” AS009H “Solovey” makes it possible sending service/alarm messages by the following means:

·        through two telephone lines which send messages in digitalized form (ADEMCO ID Contact/ADEMCO Express);

·        through one telephone number which sends a message by text (SMS);

·        through wireless link LARS.

The data-direction is programmed individually for each type of message.

OT makes it possible using up to 4 remote controls with unique codes as well as identification if each. Each remote has two buttons: “Guard” (“1”, turning on/off) and “Panic” (“2”) for making emergency call.

OT supports programmable delay (0…180s) at the input/output.

OT supports GSM network within the range 900/1800 mHz, Phase 2+, class 4 (900 mHz, 2W) and class 1 (1800 mHz, 1W). FTP and data format are expanded ADEMCO ID Contact/ADEMCO Express (chosen when programmed).

OT supports external control by means of sending SMS from any mobile telephone.

OT has got ATS100 transmitter which allows sending wireless messages. The type of the transmitter, its serial number and given parameters can be found in “Test Certificate”. Any additional information concerning this type of transmitter and its specification you can find in OT configuration.

OT enforces work of six alarm system loops. The source voltage for three main loops is 12V. OT registers closed, normal and open conditions of the loops with “normal”, “fast” and “special” modes. Protect mode registers 5 conditions, that is normal, one sensor functioning, two and more sensors functioning, loop closure and loop break. OT allows connecting loop-powered sensors, with source voltage 12V and total input current 0.6 mA in customary mode and 1.5 mA in “special” mode. It is also possible to install sensors with external power supply – OT itself, for example, provided that current-carrying rating (0.8 mA for all peripheral units) is observed.

The mode for each zone is programmed individually.

The main loops’ characteristics are given n the table:

OT may monitor the working order of loops and battery, the integrity of operation information, the condition of GSM-modem and registration in GSM network. At the same time OT allows guarding of objects in the presence of loops’ defects.

Object terminal “Antaeus” AS009H “Solovey” supports relay designed for connecting external devices (sound/light indicators).

Object terminal “Antaeus” AS009H “Solovey” supports keeping and viewing of event log.

Object terminal “Antaeus” AS009H “Solovey” supports keeping up to four user passwords, forcing password and administrator’s password preventing illegal interference.

Object terminal “Antaeus” AS009H “Solovey” may periodically send status messages to CSC. The interval of message sending may be 2-18 hours. The test messages may be sent by any possible routing (or all of them simultaneously).

Object terminal “Antaeus” AS009H “Solovey” also offers on-line diagnostics of loops, battery, transmitter, GSM-modem and connection with CSC.

Object terminal “Antaeus” AS009H “Solovey” supports switching to power backup in case of 220V network failure.

Object terminal “Antaeus” AS009H “Solovey” supports automatic battery charge in the presence of primary power supply.

OT sends corresponding messages in case of power failure, discharge and restoration of supply.

OT provides electromagnetic compatibility according to hardness group 3, GOST 50009092.

OT allows sending SMS to the mobile telephone of the user.