Terminal object “ANtaeus” AS006K and AS006KD “Snegyr”

Being a part of transmitting system “Antaeus” this equipment is designed for central guard of domestic/industrial premises and prevention of infiltration and fire. This goal is achieved by monitoring of system loops with installed alarm/fire annunciators and by sending alarm messages to the central surveillance console. CSC is connected with OT through the Ethernet. The nailed-up data connection allows constant status monitoring of OT and the guarded object.

There exist two versions of this type of equipment – AS006 and AS006SN. Version AS006SN has a standby channel of message transmitting through GSM-net and allows sending SMS to the user’s mobile phone.

The engaging/disengaging of the security system is done with the help of remote controls coming with the equipment. Besides these remotes can make an emergency call. This may also be done with the help of side-mounted keyboard, connected to OT. Other peripheral units can also be connected to OT, such as remote sense light, alerter etc.

In case of intrusion into the guarded object press the help button. Otherwise the fire suppressing gauge of the OT will send a telephone or radio message to the CSC, installed at the company providing service of the object. On receiving the message the service company identifies the address, the type of intrusion with other identification signs and takes measures targeted at property protection and criminal apprehension.

The OT can be operated:

·  with the help of remote control or electronic key iButton;

·  with the help of side-mounted keyboard ADEMCO 6128;

·  through PC interface

OT has got three light-emitting indicators and one remote indicator.

OT makes it possible using up to nine remote controls Keelog with unique codes and identification. “Snegyr” uses remotes with the so-called “rolling” code (which changes after each press). Each remote has the manufacturer’s code and unique serial number. OT uses special measures excluding a possibility of scanning/imitating the code.  

Each remote has got four buttons and allows:

• engage the security system;
• disengage the security system omitting defective zones;
• guard the object on perimeter only;
• disengage the security system;
• send an emergency call.

Some of these functions may be switched off.

Apart from remotes you can use electronic keys iButton. OT supports the usage of up to 9 bugs. Bugs and remotes can be used simultaneously.

OT supports the operating, state monitoring and programming with the help of keyboard ADEMCO 6128.

All these control and programming functions can be available through web-interface from any PC. One may work in any popular browser (Internet Explorer, Opera, Firefox and others).

 OT supports programmable delay (0…198s) at the input/output.

OT supports working in Ethernet IEEE 802.3 10Base T/100BaeT through TCP/IP. Data rate speed if 10/100 mbit/s. OT supports ARP, ICMP, DHCP, UDP, HTTP. The data interchange between CSC and OT is coded individually for each OT sample.

The access to the Ethernet may be achieved directly or through the installed concentrator. The installed concentrator must be used at presence of one port Ethernet 10Base T/100 BaseT and the necessity to net complementary units. Should the installed concentrator be required it must be mentioned in order.

OT continuously controls connection with the CSC server. Any intentional or unintentional actions bringing about interruption of transmission or OT failure are registered immediately by CSC.

OT also offers on-line diagnostics of loops and connection with CSC.

OT provides connection of 19 system loops (7 main loops, others are connected with the help of expanders). Main loops voltage is 12 V. OT registers closed, normal and open conditions of the loops with “normal”, “fast” and “special” modes. Protect mode registers 5 conditions, that is normal, one sensor functioning, two and more sensors functioning, loop closure and loop break.

OT allows connecting loop-powered sensors, with source voltage 12V and total input current 0.6 mA in customary mode and 1.5 mA in “special” mode. It is also possible to install sensors with external power supply – OT itself, for example, provided that current-carrying rating (0.8 A for all peripheral units) is observed.

The mode for each zone is programmed individually.

The main loops’ characteristics are given n the table:

OT allows connecting wire expander ADEMCO 4229 and wireless expander ADEMCO 5881. The wire expander areas (8 at maximum) are numbered 10 to 17, radio areas may be randomly numbered and replace primary areas. Any sensors of series 58XX may be uses as radio areas.

OT may suppress sensors bounces, reducing the number of false messages sent to CSC.

OT may monitor the working order of loops and area expanders (if used), the primary power supply and battery, the integrity of operation information, the condition of Ethernet and server connection. At the same time OT allows guarding of objects in the presence of loops’ defects.

OT supports GSM net within 900/1800 mHz, Phase 2+, class 4 (900 mHz, 2W) and class 1 (1800 mHz, 1W). OT supports three FTP:

·        ADEMCO ID Contact;

·        ADEMCO Express;

·        “Presto”.

Moreover OT may double all the SMSs sent to the user’s mobile phone.

The OT may automatically monitor the fund balance of the cellular service provider notifying the CSC and sending SMSs to the cell user. User can also check his/her balance at any moment.

OT supports an event log (64events)

OT supports keeping up to nine user passwords, forcing password and administrator’s password preventing illegal interference.

Coming with OT are two event-programmed relays for connecting peripheral units (light/sound annunciator). Hump current is 2A, maximal voltage – 400 V. The relays are operated regardless pre-specified events and time.

It also makes possible connecting of auxiliary equipment such as light/sound indicators with voltage 12V. The total current must not exceed 0.8 A.

OT is powered through the AC network (220 V, +22-33; 50±1Hz, 20 W at maximum) or through the Ethernet according to IEEE 802.3af (class 3).

OT has got a backup supply source that is battery FIAM-GS with capacity 4.5 ampere-hour. The switching to the backup supply source and charging at presence of the primary power supply are automatic. With fully charged battery OT operates during 24 hours (without auxiliary equipment). In case of battery running out OT sends message to CSC.

The temperature of the premises where OT is set should be +1-+40 C, with relative humidity up to 90% at temperature 25C (group SN4 according to Russian State Standard (GOST) 15150?69).

OT provides electromagnetic compatibility according to hardness group 3, GOST 50009092.

OT size should not exceed 200x210x60mm, weight is 3.5 kg at most.

Configuration of terminal object “ANtaeus” AS006K and AS006KD “Snegyr”:

The terminal object AS006S – 1

Light-emitting diode ÀË307Á ÀÀ0.336.076ÒÓ – 1

Resistor Ñ2-33-0.25 2.2kOhm ÎÆ0.467.173ÒÓ  – 7

Remote control (for AS006G) only – 2

Operation manual – 1

Package – 1 set